H00Cr21Ni10 Stainless Steel Argon-arc Welding Wire

1. Protective gas: pure Ar; flow rate: 9-14L/min when the current is 100-200A, 14-18L/min when the current is 200-300A. 2. Tungsten electrode extension length: 3-5mm; arc length: 1-3mm. 3. The wind speed is limited to ≤1.0m/s; it is recommended to pass argon protection on the back of the welding area. 4. In welding, the magnitude of the welding line energy directly affects the mechanical properties and crack resistance of the weld metal, and more attention should be paid to it. 5. Make sure to remove the rust layer, moisture, oil, dust, etc. on the welding part.
send email to us

Products Details

Widely used in petrochemical, food machinery, medical equipment, fertilizer equipment, textile machinery, etc., such as welding of 022Cr19Ni10 (SUS 304L) and other materials.

Model

Welding wire chemical composition（Wt%）

 

C

Mn

Si

Cr

Ni

Mo

P

S

Cu

H00Cr21Ni10

0.020

1.72

0.48

19.76

9.83

0.006

0.018

0.010

0.06

Compliant (equivalent) standard model

An example of physical properties of deposited metal (with SJ601)

GB

AWS

Tensile StrengthMPa

Elongation%

S308L

ER308L

585

40.0

Diameter(mm)

￠1.6

￠2.0

￠2.5

￠3.2

Welding current(A)

50-100

100-200

200-300

300-400

Wire diameter

￠1.6

￠2.0

￠2.5

Package weight

5Kg/plastic box，20Kg/carton（Contains 4 small plastic boxes）
1. Protective gas: pure Ar; flow rate: 9-14L/min when the current is 100-200A, 14-18L/min when the current is 200-300A. 2. Tungsten electrode extension length: 3-5mm; arc length: 1-3mm. 3. The wind speed is limited to ≤1.0m/s; it is recommended to pass argon protection on the back of the welding area. 4. In welding, the magnitude of the welding line energy directly affects the mechanical properties and crack resistance of the weld metal, and more attention should be paid to it. 5. Make sure to remove the rust layer, moisture, oil, dust, etc. on the welding part. The above suggestions are for reference only, and the actual situation shall prevail in the specific operation. If necessary, process qualification should be carried out before determining the welding plan.

Previous:Factory direct ERNi-1 Nickel Alloy Solid Wire for MIG/TIG Welding

Next:JQ.H00Cr21Ni10T stainless steel gas-shielded solid wire

Cast Iron Mig Welding Wire, Flux Core Welding For Beginners, Copper Welding Cable, Metal Cored Arc Welding, 6 Gauge Welding Wire, Stainless Wire For Mig Welder, 4ga Welding Cable, 6 Inch Wire Mesh, Welding Wire Cutters, E71tgs Welding Wire,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours